Basic Info.
Model NO.
uv curing machine
After-sales Service
Video Technical Support
Heating Mode
Transmission
Operation Pressure
Atmospheric Pressure
Transport Package
Wooden Case
Product Description
I. scope of application
This machine is suitable for UV photosensitive coatings, inks, adhesives, then, injection or a variety of materials on the printing surface curing and drying in an instant.
1.Printing: widely used in screen printing, plate printing, letterpress printing, self-adhesive trademarks, metal nameplates, PC, PVC, ABS, PS, acrylic, tetolon, glass, ceramics, electronic parts, single-sided circuit boards, etc.
2.Coating: wood surface bright coating, paper surface coating, plastic floor tile, PU leather coating, fiber line surface coating, etc.
3.The following aspects: circuit board CHIP parts, various electronic parts, glass, liquid crystal, terminal sealing adhesive.
4.Note: decorative color plate utensils, decorative accessories (buttons, brooches, hairpins, belt buckles, etc.).
Ii. Main technical parameters
Model: YP600-2
Voltage: 380 V AC 50Hz
Total power: 6.5kw
Dimensions: 2000*850*1650mm
Conveyor belt: bandwidth: 600mm(black mesh belt)
Uv system: 3KW*2
Uv lamp tube: 620L
Uv wavelength: 365nm
3. Performance characteristics
1.Instant drying, high production efficiency.
2.After drying can make the printing surface to achieve high hardness, high gloss, abrasion resistance, solvent resistance.
3.The transmission adopts roller transmission, frequency conversion stepless speed regulation.
4.Anti - deviation conveyor belt, ensure smooth delivery.
5.Select high quality and high efficiency lamp tube, lamp room forced heat removal, prolong lamp tube life, protect dry goods from heat deformation.
6.The surface of the box body is sprayed with plastic, beautiful and generous, corrosion-resistant.
This machine has novel model, reasonable structure, large effective working area, complete function, simple operation, convenient maintenance and adjustment, low noise, high reliability, low cost, low energy consumption and high production efficiency.
Installation of the machine
1. After the machine is unpacked, everything can be ready.
2. The four sides of the machine shall keep the space required for operation of each line.
3, the machine foot screw rotation to the four casters from the ground, four regulation foot cup flat to the ground can be stable.
4, the machine can be installed after power supply.
After connecting the power supply, the machine can be started up. Generally, the ex-factory machine has been adjusted in a better working state before leaving the factory. If there is no special reason, do not transfer the machine.Especially transport belt adjustment balance handwheel, do not arbitrarily adjust
Main operating instructions
1. Switch on the power, open the control door, close the power and air switch.
2. Screw the general power switch to 1 gear, turn on the temperature control switch, transport switch and switch on the governor, and adjust the transport speed of the transport belt to meet the requirements.
3, press the light 1 open button, UV lamp 1 on, the ammeter is indicated;Then press the light 2 open button, light 2 is on, electricity
Flow table 2 has indications.
4. The indicated temperature of the thermometer starts to work. When the temperature rises to 40~50ºC, please turn on the fan switch and turn on the fan immediately.If the temperature exceeds the required temperature of the product, turn off the UV lamp and ask the fan to lower the temperature, so as not to cause unnecessary losses to the product.
Vi. Maintenance and matters needing attention
1, outside the machinery means to keep clean and dry, the ground can not have water.
2. Mechanical transmission shaft, bearing and chain should be oiled regularly.
3, if have discovery lamp tube touch sundry, cannot use the hand to swab directly, swab clean with handkerchief or clean cloth piece of alcohol, make lamp tube work in best condition.
4, do not open the side of the UV machine after boot, UV light on the skin, eyes have a certain harm.
5. Do not open the control door after starting up. It is strictly forbidden to wipe or touch the electrical appliances inside with hands or other things.To avoid electric shock.
6, regularly on the electrical parts dust blowing clean.
Picture:
Address:
Room 102, No. 7, Fengxing Road, Liaobu Town, Dongguan City, Guangdong Province, Dongguan, Guangdong, China
Business Type:
Manufacturer/Factory
Business Range:
Manufacturing & Processing Machinery
Management System Certification:
ISO 9001
Company Introduction:
Dongguan Gusam Precision Machinery Co., Ltd was established in 2008, located in Dongguan, Guangdong Province, We have more than 20 years of rich experience, advanced production equipment and a number of patented technologies in the printing industry. We mainly produce automatic pad printing machine, screen printing machine, hot stamping machine, printing machine and so on. Our company offers variety of products which can meet your multifarious demands. We adhere to the management principles of "quality first, customer first and credit-based" since the establishment of the company and always do our best to satisfy potential needs of our customers. With the progress of The Times, we also go to many manufacturers around the world, to meet their requirements in different industries in a variety of material objects in the plane, four sides and convex surface of the difficult pattern text printing. Our company promises to manufacture every machine by heart, and will wholeheartedly provide service for our customers with new business model and high quality service attitude We are sincerely willing to cooperated with enterprises from all over the world in order to realize a win-win situation since the trend of economic globalization has developed with anirresistibleforce.